Flotation Machine for Processing Copper Ore in Panama

Technical Requirements

1.The flowchart is just for reference.

2.The process is adjustable according to the site requirements, but part placement cannot be changed.

3.Foundation dimensions of equipments are subject to our drawing.

4.Any question pls contact us online.

1. Crushing: The purpose is to crush the copper ore to an appropriate size, and then proceed to the next part of grinding. The beneficiation equipment used to crush copper ore is mainly a jaw crusher, which is used for primary crushing.

2. Grinding: Grinding the crushed part to further process the ore to obtain a smaller size and prepare for the next part of flotation. After the preliminary crushing, the copper ore is uniformly sent to the ball mill by the bucket elevator and belt conveyor, and the ore is crushed and ground by the ball mill; and reasonably classified by the spiral classifier, the slurry that does not meet the flotation requirements is returned re-grind in the ball mill.

3. Flotation: The flotation process is an important process of copper ore dressing. The graded pulp material that meets the conditions is sent to the mixing tank, fully mixed and stirred with the reagent, and then sent to the flotation machine for separation and processing to obtain a higher purity copper concentrate slurry.

4. Drying: At last, it is preliminarily concentrated and precipitated by a concentrator, and dried by a rotary dryer to obtain copper concentrate powder.